MARSHALL
STAMPING COMPANY
Manufacturer of
Quality Building Products
Since 1951
355 Glade Mills Rd. • Valencia, PA 16059-3315 • Phone: 800-635-1166 • Fax: 724-898-3339 • info@marshallstamping.com

Access Doors, Foundation

Anchor Bolts

Angles, Rolled

Area Walls & Accessories

Ash Dumps

Bar Strainers (C.I.)


Basement Windows

Baskets, Fireplace

Bell Traps (C.I. & PVC)

Brick Clamps

Chimney Caps

Cleanout Doors (C.I. & STL)

Columns


Dampers/Controls (C.I.)

Foundation Anchors

Jack Posts

Lintels, Block & Brick

Mortar Boxes & Pans

Nail Stakes (Steel)

Rebar Caps

Rebar Chairs

Tie Wire

Trench Drain

Ventilators, Brick and FND.

Wall Ties

sep

pdf

Extend-O-Columns - 3"  ,  3 1/2" &  4" Dia. 11Ga. ,  3 1/2" Dia. .216 Wall
Fixed Length Columns - 3" ,  3 1/2" &  4" Dia. 11Ga. ,  3" Dia. .216 Wall

Column Accessories
ATI-ES Code Compliance Research Report (CCRR-0145)

Columns

Adjustable Length - "Extend-O Columns"

Print Friendly Link

Steel Column - 4" Diameter 11 Gauge
Column - 4" Diameter

• Complies with IRC + IBC

• Completely Assembled:

  4" x 8" plate welded to top end and 3 1/2" x 6" Plate permanently attached to screw on bottom end.

• Flow-coated inside and out with red corrosion-resistant paint.

• Straps availiable on request.

• Standard Bundles: 4" - 25 pcs.

All loads listed are with the screw extended 6 1/2", and encased in concrete.

4" Diameter Round - 11 Gauge
See ATI-ES Code Compliance Research Report CCRR-0145
Model
Adjustable Length
Weight
Maximum Load*
AC460
6'0" to 6'4"
37.75#
28,900
AC463
6'3" to 6'7"
39.00
28,500
AC466
6'6" to 6'10"
40.25
28,100
AC469
6'9" to 7'1"
41.50
27,600
AC470
7'0" to 7'4"
42.75
27,200
AC473
7'3" to 7'7"
44.00
26,800
AC476
7'6" to 7'10"
45.25
26,300
AC479
7'9" to 8'1"
46.50
25,800
AC480
8'0" to 8'4"
47.75
25,300
AC483
8'3" to 8'7"
49.00
24,800
AC486
8'6" to 8'10"
50.25
24,400
AC489
8'9" to 9'1"
51.50
23,900
AC490
9'0" to 9'4"
52.75
23,400
AC493
9'3" to 9'7"
54.00
23,000
AC496
9'6" to 9'10"
55.25
22,400
AC499
9'9" to 10'1"
56.50
21,900
AC4100
10'0" to 10'4"
57.75
21,400
AC4103
 10'3" to 10'7"
59.00
20,900
AC4106
10'6" to 10'10"
60.25
20,400
AC4109
10'9" to 11'1"
61.50
19,900
AC4110
11'0" to 11'4"
62.75
19,500
AC4113
11'3" to 11'7"
64.00
18,900
AC4116
11'6" to 11'10"
65.25
18,400
AC4119
11'9" to 12'1"
66.50
17,900
AC4120
12'0" to 12'4"
67.75
17,400
All loads listed are with the screw extended 6 1/2", and encased in concrete.

 


IMPORTANT
Column selection should be based upon structural calculations completed by a registered professional engineer. Not responsible for the installation, alteration, or modification of any completed product, or the usage of any component in the fabrication of any product beyond our control. See ATI-ES Code Compliance Research Report (CCRR-0145).


355 Glade Mills Rd. • Valencia, PA 16059-3315 • Phone: 800-635-1166 • Fax: 724-898-3339 • info@marshallstamping.com